Switch Industrial de Retea Planet, 3 Porturi 10/100/1000Mbps din care 2 Porturi 802.3 at/af PoE, Alimentare din Panouri Fotovoltaice, Conditii extreme de functionare (-20 la +60 gr C) - BSP-300

Cod: BSP-300

Switch Industrial cu alimentare solara, 3 Porturi Gigabit, 802.3 at/af PoE

Integrarea tehnologie PoE cu Sistemul de Alimentare Solar
Deoarece nevoia de a instala echipamente de retea in locuri greu accesibile a crescut tot mai mult, Planet BSP-300 Industrial Solar Power PoE este solutia ideala pentru a obtine acest lucru. Alimentat de o sursa cu zero emisii de carbon, adica lumina solara, BSP-300 foloseste tehnologia de incarcare (PWM), pentru a forta in mod eficient panourile solare sa functioneze la aceeasi tensiune ca si bateria ce stocheaza energia, in timpul încarcarii. BSP-300 poate sa furnizeze putere PoE dispozitivelor de retea oriunde, fara nici un obstacol sau fara a depinde de mediul geografic in care se instaleaza echipamentele.
Odata cu integrarea tehnologie PoE IEEE 802.3at cu sistemul de energie solara, BSP-300 ofera solutii simple si fara eforturi de intretinere pentru cei care au nevoie de conexiune rapida, care necesita o mare flexibilitate si fiabilitate, cum ar fi monitorizarea de la distanta prin retelele wireless .

Usor de folosit si integrat
Prin cele două interfete Gigabit de mare putere PoE IEEE 802. , BSP-300 poate livra tensiune de alimentare catre echipamente precum Acces Point-urile Wireless și Camere de Supraveghere cu IP, astfel accesarea sistemelor de supreveghere video la distanta , devenind mult mai usor de realizat. Doar prin simpla conectare a lui BSP-300 la camerele de supraveghere video prin IP se obtine un sistem complet si complex de supraveghere, fara a mai folosi cabluri.

Sursa de Alimentare Stabila si Emisii de Carbon Zero
BSP-300 utilizeaza ca sursa de alimentare energia solara si impreuna cu bateriile nichel-cadmiu sau baterii plumb-acid, alcatuiesc un sistem independent de alimentare cu energie solara pentru retelele exterioare. BSP-300 ofera zero emisii de carbon si sursa de alimentare neintreruptibila pentru aplicatii de supraveghere IP si retele de date wireless de exterior, fara a fi nevoie de orice fel de cablare. Acest sistem reduce cu 100% pierderile de putere. BSP-300 poate sa furnizeze echipamentelor din retea tensiune de alimentare si in acelasi timp sa incarce baeteria.

Aplicabilitate
• Paduri / Monitorizarea Parcurilor Nationale
• Supravegherea Video Publică / Retele Wireless Metropolitane
• Telecomunicatii / Extinderea retelelor ISP
• Spitale / Servicii Medicale la Distanta
• Porturi / Platforme Petroliere / Industria Miniera
• Infrastructura de comunicatie pentru situatii de urgent.

Solar PoE Power Supply for Long Distance Wireless Surveillance Solution
Provides Plug-and-Play instant Internet Service, the BSP-300 can be deployed anywhere in the city where there is need of Wireless Internet Connection. With the two 802.3at / 802.3af PoE interfaces, the BSP-300 enables you to install the PoE Access Point such as PLANET WAP-7350 and WSG-500 in any place of the city where there is no direct AC electricity. Just connect the PoE wireless access points or IP cameras to the BSP-300, the wireless LAN or Surveillance system can be deployed immediately.

By working with a pair of serial over Ethernet Media Converter and the Wireless transmission, the BSP-300 Industrial Solar Power PoE Switch can be efficiently managed from remote monitor center.

Hardware Specification
Network Connector 3-Port RJ-45 for 10/100/1000Base-T
(2-Port with 802.3at / 802.3af PoE injector function)
Console Port 1 x RS-232 RJ-45 serial port
Power Output 1 x DC out 24@ 2A maximum (two-pin terminal block)
2 x PoE out 52VDC; max. 30 Watts per PoE port
LED System
• System (Green)
• Fault (Green)

Per PoE Port (Port 1 / Port 2)
• Link / Active (Green)
• PoE In-Use (Orange)

LAN Port (Port 3)
• 1000 Link / Active (Green)
• 10/100 Link / Active (Green)

Per PoE Interface
• Power LNK/ACT (Green)
• PoE In-Use (Orange)
Power over Ethernet
Standard IEEE802.3at / IEEE802.3af
Port Port 1, Port 2
Power pin RJ-45 Pin# 1/2 (+); Pin# 3/6 (-); PSE End-span
Power voltage injecting DC 52V
Consumption 30 watts max.; PoE Class 4
Electrical Characteristics
System voltage ratings DC 24V
Maximum charging current 15A
Max. solar array Voc DC 60V
Max. operating voltage DC 45V
Total current consumption While operating -32Ma
At idle -11mA
High temperature shutdown 100 Degree C disconnect solar and load
80 Degree C reconnect solar and load
Overload Capacity Over 15 Amp will cut off output load
Battery Charging Characteristics
Charge algorithm Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection.
Maximum output current 15A
Nickel-cadmium battery ± 40 mV/Degree Celsius for NiCad type batteries, Charge cut-off @ 55 Degree C
(Temperature compensation Baseline@ 25 Degree C)
Lead-acid battery (Default Setting) ± 60 mV/Degree Celsius for lead acid type batteries, Charge cut-off @ 55 Degree C
(Temperature compensation Baseline@ 25 Degree C)
Float charge voltage DC 27.2V (26.0~30.0V)
Absorption charge voltage DC 29.2V (28.0~32.0V)
LVD (Low Voltage Disconnection) DC 22.2V (21.0~25.0V)
LVR (Low Voltage Reconnection) DC 24.8V (23.0~27.0V)
Standards Conformance
Computer Interface IEEE 802.3 10Base-T
IEEE 802.3u 10/100Base-TX
IEEE 802.3ab 10/100/1000Base-T
IEEE 802.3at / 802.3af for PoE (Power over Ethernet) devices
Regulation Compliance CE, FCC
System Unit
Operating Temperature -20 ~ 60 Degree C
Storage Temperature -40 ~ 90 Degree C
Operating humidity 20% ~ 80%
Dimension (W x D x H) 107.2 x 152 x 65.7 mm
Weight 0.79kg
Installation DIN Rail Kit and Wall Mount Kit
Software Utility Device detect / diagnostic, Windows XP / Win 7
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate