Switch de Retea Planet cu Smart Web Management, 8 Porturi 10/100/1000Mbps cu 802.3 af PoEsi 2 sloturi SFP Gigabit - GSD-802PS

Cod: GSD-802PS

Switch Smart Web Management, 8 Porturi 10/100/1000Mbps cu 802.3 af PoE + 2 Porturi Gigabit / SFP

Lead Power over Ethernet Device into High-Speed Generation of Gigabit Ethernet
For cost saving, flexibility and high-speed data transmission using PoE power provision, all of the 10/100/1000Mbps copper ports of PLANET GSD-802PS provides PoE power injector function which is able to drive 8 IEEE 802.3af compliant powered devices with maximum up to 15.4 watts of power per port.

With data and PoE, the GSD-802PS can reduce cables and eliminate the need for electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power, thus lowering the installation costs, simplifying the installed effort and eliminating the need for electricians or extension cords. The key feature of the GSD-802PS is energy saving. With more efficient switching power supply, the efficiency of the GSD-802PS would be much better than four linear power adapters in the long run.

Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet and Gigabit Ethernet workgroups and networks. With Gigabit throughput supported, the Gigabit PoE switch won’t be the bottleneck of a PoE networking environment any more.

Cost-effective Desktop Size / High-Speed / Fiber Capability WEB Smart Switch
The GSD-802PS is a Gigabit Web Smart PoE Switch with 8-port 10/100/1000Mbps copper ports and 2 SFP slots, utilizing a compact form factor which can be mounted in a 19-inch rack with optional rack-mounting kits and placed on desktop. The enhanced management features are shown below:
• 802.3af Power over Ethernet
• 802.1X Authentication / RADIUS
• 802.1Q VLAN
• SNMP monitor and SNMP Trap
• IGMP Snooping
• Rapid Spanning Tree

High Gigabit Performance / Wire-Speed Switching
With 16Gbps non-blocking switch fabric, 8K MAC address table and IEEE 802.3x full-duplex flow control, the GSD-802PS offers wire-speed packet transfer performance without risking of packet loss. The two Gigabit SFP (Small Factor Pluggable) slots can be installed with 1000Base-SX / LX mini-GBIC modules which offer incredible extensibility, flexibility and connectivity to the Core switch or servers.

Friendly / Simple Web Management Interface
For efficient management and with its built-in Web-based management, the GSD-802PS offers an easy-to-use and configuration facility. The smart functions make it easy to survey and control the PoE power provision via the web interface. The GSD-802PS can be programmed for basic switch management functions such as per port speed duplex settings, Port Trunking, VLAN, Port Mirroring, Rapid Spanning Tree, 802.1X network security authentication and Misc Configuration. Additionally, the firmware includes advanced features, such as PoE control, IGMP snooping, QoS (Quality of Service), broadcast storm and bandwidth control to enhance bandwidth utilization.

Department / Workgroup PoE Switch:
Providing up to 8 PoE, in-line power interfaces, the GSD-802PS can easily build a power centrally-controlled IP phone system, IP Camera system and AP group for the enterprises. For instance, 8 cameras / APs can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office. Without the power-socket limitation, the GSD-802PS makes the installation of cameras or WLAN AP easier and more efficient.

Layer 2 functions
Management Interface Web Browser, SNMPv1, v2c monitor and SNMP Trap
Port Configuration -Port disable / enable. Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
-Flow Control disable / enable
-Bandwidth control on each port
VLAN Port-Based / IEEE 802.1Q Tagged Based VLAN
Up to 64 VLAN groups
Link Aggregation Supports 4 groups of 8-Port trunk
IEEE 802.3ad LACP
QoS Traffic classification based on 802.1p priority, DSCP field in IP Packet
IGMP Snooping IGMP (v1 / v2) Snooping, up to 64 multicast Groups
SNMP MIBs RFC-1213 MIB-2
RFC-1573-Interface MIB
RFC-2819 RMON MIB (Group 1)
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3z Gigabit 1000Base-SX / LX
IEEE 802.3x Flow Control
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.3af Power over Ethernet
Network Media 10Base-T-UTP / STP category 3, 4 or 5 cable
100Base-TX-UTP / STP category 5 cable
1000Base-T-UTP / STP category 5e / 6 cable
1000Base-SX/LX
• 62.5 / 125µm multi-mode fiber optic cable, up to 220m
• 50 / 125µm multi-mode fiber optic cable, up to 550m 1000Base-LX
• 9 / 125µm single-mode fiber optic cable, up to 120km (Vary on SFP Module)
Hardware
Hardware Version Version 2
Copper Ports 8 10/ 100/1000Base-T RJ-45 Auto-MDI / MDI-X ports
SFP / mini-GBIC Slots 2 SFP interfaces, shared with Port-7 and Port-8
PoE Power Output 48V DC, 15.4W, 350mA (Pin 1, 2, 3, 6)
PoE Power Budget 123.2 watts
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps / non-blocking
Switch Throughput 11.9Mpps
Address Table 8K MAC address table with auto learning function
Share Data Buffer Built-in 176K bytes chip buffer
Flow Control Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
Jumbo Frame Up to 9K Bytes (Disable, 4K, 9K)
LED Power, 1000 Link / Act, 10/100 Link / Act per port
Dimensions (W x D x H) 330 x 155 x 43.5 mm
Weight 1.8 kg
Power Requirements 100 - 240VAC, 50 - 60Hz, Auto-sensing
Power Consumption 140 watts / 477.4 BTU
Temperature Operating: 0~50 degrees C
Storage: -10~70 degrees C
Humidity Operating:10~90%, Storage: 5~95% (non-condensing)
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate