Media Convertor/Switch fara Management , de la Ethernet 10/100 TX, la Fibra Optica 100Base- FX(SFP), 2 porturi Redundante - FT-1205A

Cod: FT-1205A

Media convertor fast ethernet cu 2 sloturi SFP de fibra optica

The PLANET FT-1205A is a 3-Port Redundant Media Converter which supports conversion between 10 / 100Base-TX and 100Base-FX network. The difference with the other one-port channel media converter is the Redundant Media Converter. It is designed for critical networks that require fibers or copper links to automatically recover less than 10ms, such as ISPs, telecom, hospitals, banks and enterprises.

Via the built-in DIP-switches, the converter can be configured as 3-Port Ethernet switch or 2-Port Redundant media converter. With the 3-Port Switch mode, it can operate Store-and-Forward mechanism with high performance, and it can also prevent packet loss via IEEE 802.3x Flow Control (Full-Duplex) and Back Pressure (Half-Duplex).

With the 2-Port redundant Mode, it provides less than 10ms redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair.

The SFP slot supports single-mode, multi-mode and WDM small-form factory type transceiver modules for various applications. The FT-1205A is with high reliability and flexibility to extend the distance up to 2km, 20km or longer. It depends on the 100Base-FX SFP transceiver modules, the Ethernet signal that allows two type segments connect easily, efficiently and inexpensively.

The converters can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700, MC-1500, MC-1500R and MC-1500R48. As the other PLANET FT-Series media converters, they're hot swappable in MC-Chassis.

Fault Tolerant Redundant Link for critical network applications
The FT-1205A is designed for optical fiber networks that require rapid link redundancy. With the auto-recover less than 10ms, the redundant media converter provides the rapid response time required for critical applications.

Ports-Copper 1 x 10 / 100Base-TX port
Ports-Fiber 2 x 100Base-FX port
Optic Interface SFP
Optic Wavelength Very on SFP module
Launch Power (dBm)-Max. Very on SFP module
Launch Power (dBm)-Min. Very on SFP module
Receive Sensitivity Very on SFP module
Maximum Input Power Very on SFP module
Redundant Link Port 1 (Primary)
Port 2 (Backup)
Cable-Twisted-pair 10Base-T : 2-Pair UTP Cat. 3, 4, 5, up to 100 m
100Base-TX : 2-Pair UTP Cat. 5, 5e up to 100 m
Cable-Fiber-optic Cable 50 / 125µm or 62.5 / 125µm multi-mode fiber cable, up to 2km.
9 / 125µm single-mode cable, provides long distance for 20 / 40 / 60km or longer (very on SFP module)
Speed-Twisted-pair 10 / 20Mbps for Half / Full-Duplex
100 / 200Mbps for Half / Full Duplex
Speed-Fiber-optic 200Mbps for Full-Duplex
LED Indicators System: One Power LED
TP Port: One Speed; One LNK / ACT
Fiber Port: One Link / Act
DIP Switches DIP 1: On 3-Port Switch Mode; Off 2-Port Redundant
DIP 2: On Loop Back Reply Enable; Off Loop Back Reply Disable
Standards IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
IEEE 802.3x Flow Control
Power Consumption 6.7 Watts (maximum)
Power Input 5V / 2A
Dimension (W x D x H) 97 x 69 x 25 mm
Operating Environment Operating temperature: 0~50 Degree C
Humidity: 10~90% non-condensing
Storage Environment Storage temperature: -25~70 Degree C
Humidity: 10~90% non-condensing
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate