Media Convertor Planet Video BNC-Fibra Optica multi mode (ST) Kit (Emitator / Receptor) include perechile Tx si Rx - VF-101-KIT

Cod: VF-101-KIT

Media convertor video BNC cu port de fibra multi mode ST - 2 Km

Long Distance Analog Surveillance Transmission System
The analog cameras and DVRs are still applied mostly in traditional surveillance systems while the main stream turns to IP-Based surveillance gradually. To help the analog camera deployment in long distances to provide high video transmission quality and reliable signal, PLANET develops the Video over Fiber media converter which successfully integrates the video signal and fiber optic transmission in a compact size mini box. The Video over Fiber media converter enables the videos to be delivered in high quality up to 20km long distance by the intelligent encoding / decoding technology. It is ideal for extending the distance and signal conversion by transmitting the video and data over the fiber-optic cable.

Fiber Optic Communication for VIDEO and SERIAL DATA
This Video over Fiber Converter kit consists of a Video Transmitter and a Video Receiver:

VF-10x-T: 1-channel Video over Fiber Transmitter
VF-10x-R: 1-channel Video over Fiber Receiver

It is a digital fiber-optic transmission system which brings customer a cost-effective solution for transmission of 1 channel uncompressed digital video and 1 reverse RS-485 async-data over one single fiber cable. It is an adjustment free device providing high quality and real-time video transmission. The system can be widely used in Intelligent Transportation Systems (ITS), traffic surveillance, security monitoring, automation control, intelligent residential districts and so on.

Easy Installation
The VF-10x-KIT media conversion installation is quite easy by simply plug and play. They can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis (MC-700, MC-1500 and MC-1500R). When working with the media converter chassis, the media converter chassis provides DC power to VF-10x-T or VF-10x-R to maintain the video over fiber-optic transmission system at the central location.

The VF-10x-KIT consists of 1 channel video over fiber optical transceiver and receiver to transmit video and RS-485 signal through a reliable single mode / single fiber link. It is an ideal cost-effective solution for surveillance system that requires high display quality and high performance signal transmission over long distances. The VF-10x-KIT can be installed easily by plug and play, meaning the operator does not need to configure the pair of the video over fiber transmission in advance.

The transmitter and receiver can work stand-alone or slotted into a rack-mountable media converter chassis. The flexible and maintenance-free design fits with different installation environments. Up to 20km distance of video camera deployment with one VF-10x-KIT ideally suits the following applications:

• Intelligent Transportation Systems (ITS)
• Toll Collection
• Traffic Surveillance
• Air Traffic Management (ATM)
• Rail Signaling
• Perimeter Alarms and Area Monitors
• Telemedicine and Teleconference
• Industrial Surveillance
• Intelligent Building

Video Characteristic
Video Channel 1 channel Bi-direction
Signal Mode NTSC / PAL
Video Connector BNC
Video Input / Output Impedance 75ohm / unbalanced interface
Video Input / Output Voltage 1.0 Vpp / Typical peak-peak value
Video Bandwidth 6.5MHz
Video Digital Bit Width 8/10 bit
Differential Gain(DG) <1.3% (Typical Value)
Differential Phase(DP) <1.3° (Typical Value)
SNR Weighted 63dB (Typical Value)
Data Interface
Data Channel 1 channel
Physical Protocol RS-485
Operation Mode Simplex
Data Connector 3 pin terminal block with screw clamps
Data Rate DC-115.2Kbps
Data Distance RS-485: 0-1200m
Bit Error Rate (BER) < 10ns
Optical Interface
Optical Connector VF-101-KIT   ST
VF-102-KIT   FC
VF-102SC-KIT   SC
VF-102S15-KIT   SC
VF-106-KIT   SC, WDM
Distance VF-101-KIT   2Km for multi-mode
VF-102-KIT   20km for single-mode
VF-102SC-KIT   2km for multi-mode
VF-102S15-KIT   15km for single-mode
VF-106-KIT   20km for single-mode
Optical Wavelength VF-101-KIT
VF-101-T   TX & RX: 1310nm
VF-101-R   TX & RX: 1310nm

VF-102-KIT
VF-102-T   TX: 1310nm, RX: 1550nm
VF-102-R   TX: 1550nm, RX: 1330nm

VF-102SC-KIT
VF-102SC-T   TX & RX: 1310nm
VF-102SC-R   TX & RX: 1310nm

VF-102S15-KIT
VF-102S15-T   TX & RX: 1310nm
VF-102S15-R   TX & RX: 1310nm

VF-106-KIT
VF-106-T  TX: 1310nm, RX: 1550nm
VF-106-R  TX: 1550nm, RX: 1330nm
Launch Power (dBm) VF-101-KIT
   Max. : -14, Min. : -19
VF-102-KIT
   Max. : -7, Min. : -14
VF-102SC-KIT
   Max. : -14, Min. : -19
VF-102S15-KIT
   Max. : -7, Min. : -20
VF-106-KIT
   Max. : -8, Min. : -14
Receive Sensitivity (dBm) VF-101-KIT-34.5dBm
VF-102-KIT-32dBm
VF-102SC-KIT-34.5dBm
VF-102S15-KIT-28dBm
VF-106-KIT-31dBm
Max. Input Power (dBm) VF-101-KIT  -14
VF-102-KIT  -0
VF-102SC-KIT   -14
VF-102S15-KIT  -8
VF-106-KIT  -0
Cable 50/125μm or 62.5/125μm multi-mode cable
9/125μm single-mode cable
Hardware Specifications
LED Indicators • One Power
• One for Video
     - Green, Link
• One for Fiber Optic
    - Green, Link
Dimensions (W x D x H) 94 x 70 x 26 mm
Weight 215g
Power Requirements 5V / 2A
Power Consumption 4.8 watts (maximum)
Mechanical Metal
Installation Wall-mountable, DIN-rail (with optional kit), chassis installation
Compatible Converter Chassis MC-700 / MC-1500 / MC-1500R
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Environment
Operating Temperature:-10 ~ 60 degrees C
Relative Humidity:5 ~ 95% (non-condensing)
Storage Temperature:-10 ~ 70 degrees C
Relative Humidity:5 ~ 95% (non-condensing)
 
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate