Injector Hub de Retea, 12 Porturi 10/100Mbps cu 802.3 af PoE (200W) - POE-1200P2

Cod: POE-1200P2

Quick and Easy PoE Network Deployment
The PLANET POE-1200P2 is 12-Port IEEE 802.3af Power over Ethernet Web Management injector Hub and complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. With 12 10/100Base-TX Fast Ethernet ports, POE-1200P2 support full 48V DC power for any remote IEEE 802.3af powered device (PD) like Wireless LAN Access Point, IP phone, and IP Camera. Supporting PoE power budget of 190 watts, POE-1200P2 provides sufficient 15.4 watts PoE power to 12 remote PD devices.

Easy Cabling Installation
The POE-1200P2 is installed between a regular Ethernet Switch and the powered devices, injecting power without affecting the data transmission. They offer a cost effective and quick solution to upgrade network system to IEEE 802.3af Power over Ethernet system without replacing the existing Ethernet switch. There are 24 RJ-45 STP ports on the front panel of PoE Injector Hub, in which the 12 ports on the lower stack function as "Data input" and the other 12 ports on the upper stack function as "PoE (Data and Power) output". Each of the "PoE output" port on the upper stack operates as a power injector which transmits DC Voltage to the CAT 5 cable to transfer data and power simultaneously between the Injector and Splitter.

Friendly / Simple Web Management Interface
To efficiently manage the powered devices, POE-1200P2 provide Web management interface in which administrators can use the functions including port Enable / Disable, port priority, system configuration, and Username / Password changing and with smart features for powered device. The PoE injector Hub can auto detect the power status of each port and show massages on its Web management interface. These features also provide a cost-effective way to manage the device via from Internet whenever you are at work or at home.

PoE Injector Hub
For the places hard to find the power outlet, POE-1200P2 provides the easiest way to power your Ethernet devices such as PLANET IP Camera ICA-750 on the ceiling and the Wireless Access Point WAP-4060PE installed on the top of the building.

To control the power system of your networking devices, POE-1200P2 can directly co-work with PoE IP phone like PLANET VIP-254PT to build VoIP telephony network in the office. Furthermore, the POE-1200P2 can be directly connected to any third party 802.3af compliant devices and PoE Switches installed 100 meters away. 

Hardware Specification
Interface "Data" Input Ports: 12 x RJ-45 STP
"PoE (Data+Power)" Output Ports: 12 x RJ-45 STP
Management Port: 1 x RJ-45; 10/100Base-TX, auto-negotiation, auto-MDI / MDIX
LED System: Power x 1 (Green)
Management Port x 2: 10/100 (Green / Orange)
Per PoE Port: PoE in Use x 1 (Green)
Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Dimension (W x D x H) 440 x 200 x 44 mm (1U height)
Weight 2.7kg
Power Requirement 100-240V AC, 50/60 Hz
Power Consumption 200 watts max.
Operating Temperature 0 ~ 50 Degree C
Storage Temperature -40 ~ 70 Degree C
Humidity 5 ~ 95% (Non-condensing)
Cooling Fan x 1
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / Mid-Span PSE
PoE Power supply Type Mid-Span
PoE Power Output Per Port DC 48V 15.4 watts
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 190 Watts
Management
Management Interface Web, PLANET Smart Discovery Lite
PoE Management Power Limit by Priority and Total Limit
Per port power enable/disable
Power feeding priority
Current usage and status
Total power consumption
Management Feature System / Management functions setup
Web firmware upgrade
SNMP Trap for alarm notification of events
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
 
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate