Acces Point /Repeater Wireless de exterior, antena interna de 14dbi cu polarizare duala, 300Mbps, 11 a/n, PoE pasiv, IP55, 5 GHz - WNAP-7320

Cod: WNAP-7320

Acces Point de exterior, antena interna cu polarizare duala de 14dbi, 300Mbps, 11 a/n, PoE pasiv, IP55, 5 GHz

High Power Outdoor Wireless Coverage
PLANET Technology introduces the latest high power outdoor wireless LAN solution - the 300Mbps Outdoor Wireless AP, WNAP-7320. It provides higher transmit power, better performance, more widely coverage and stable connection than standard outdoor wireless AP. The WNAP-7320 is compliant with IEEE 802.11n standard and 2T2R MIMO technology which makes it possible to deliver data rate up to 300Mbps, six times faster than normal 802.11a wireless device. Via the embedded 14dBi dual-polarization (vertical and horizontal) directional antenna, it provides good diversity coverage and better noise immunity. Not only features high sensitivity but also the high output power up to 500mW, the WNAP-7320 can extend higher coverage in outdoor long range applications.

Multiple Operating & Wireless Modes
The WNAP-7320 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater) allowing for various application requirements and thus gives users more comprehensive using experience. It helps users to easily build a wireless network and extend the wireless range of existing wireless network. The WNAP-7320 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.

Advanced Security and Management
In aspect of security, besides 64/128-bit WEP encryption, the WNAP-7320 integrates WPA / WPA2, WPA-PSK and WPA2-PSK to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. In addition, with the Dual-SSID feature you can setup two different wireless networks, the WNAP-7320 can therefore serve as a virtual access point for segmented networks tailored to any office or industrial need.

Highly Reliable Outdoor Device
The WNAP-7320 is perfectly suitable to be installed in outdoor environments and exposed locations. Rated to operate at the temperature from -30 to 75 Degree C and adopted IP55 and outdoor UV Stabilized Enclosure; the WNAP-7320 can perform normally under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-7320 can be easily installed in the areas where power outlets are not available. It is the best way using the WNAP-7320 to build outdoor wireless access applications between buildings on campuses, business, rural areas, etc.

Easy Installation & Management
With User-friendly Web UI and step by step Setup Wizard, the WNAP-7320 is easier to install, even for users who never experience setting up a wireless network. Furthermore, with SNMP-Based management interface, the WNAP-7320 is convenient to be managed and configured remotely.

Longer distance coverage between LAN connections
The WNAP-7320 is a cost-effective outdoor wireless solution for widely open space applications. It is best suitable for outdoor wireless connections between buildings.

With built-in 14dBi dual-polarization directional antenna, the WNAP-7320 brings higher coverage and longer distance of wireless connection. The WNAP-7320 provides high output power with multiple adjust Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. Moreover, the WNAP-7320 supports WISP mode to enable CPE users to connect to Internet via local WISP provider.

**Sincerely suggest match the same model in outdoor wireless bridge application for getting best performance.

Hardware Specifications
Standard support IEEE 802.11a/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
Memory 32 Mbytes DDR SDRAM
8 Mbytes Flash
Interface Wireless IEEE 802.11a/n, 2T2R
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
Antenna Built-in 14dBi Dual-Polarization Antenna
- Horizontal: 45 degree
- Vertical: 60 degree
Wireless RF Specifications
Wireless Technology IEEE 802.11a
IEEE 802.11n
Data Rate IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbps
Media Access Control CSMA / CA
Modulation Transmission / Emission Type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band 5.180GHz ~ 5.825GHz
Operating Channel
5.180GHz CH36 5.580GHz CH116
5.200GHz CH40 5.600GHz CH120
5.220GHz CH44 5.620GHz CH124
5.240GHz CH48 5.640GHz CH128
5.260GHz CH52 5.660GHz CH132
5.280GHz CH56 5.680GHz CH136
5.300GHz CH60 5.700GHz CH140
5.320GHz CH64 5.745GHz CH149
5.500GHz CH100 5.765GHz CH153
5.520GHz CH104 5.785GHz CH157
5.540GHz CH108 5.805GHz CH161
5.560GHz CH112 5.825GHz CH165

*The above 24 channels are defined in theory. The actual application will vary depends on the regulation in different regions and countries.
RF Output Power IEEE 802.11a: 27 ± 1dBm
IEEE 802.11n: 24 ± 1dBm
Receiver Sensitivity IEEE 802.11a: -92 ~ -73dBm @ 6Mbps ~ 54Mbps
IEEE 802.11n: -94 ~ -73dBm @ MCS0 ~ MCS15
Output Power Control 3~27dBm
Software Features
LAN Built-in DHCP server supporting static IP address distributing
Supports 802.1d STP (Spanning Tree)
WAN ■ Static IP
■ Dynamic IP
■ PPPoE
■ PPTP
■ L2TP
■ IPSec
Operating Mode ■ Bridge
■ Gateway
■ WISP
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering
Wireless Mode ■ AP
■ Client
■ WDS PTP
■ WDS PTMP
■ WDS Repeater (AP+WDS)
Channel Width 20MHz / 40MHz
Wireless Isolation Enables isolation of each connected wireless client from communicating with each other mutually.
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup )
Enable / Disable SSID Broadcast
Multiple SSID Up to 2
Max. Wireless Client 40
Max. WDS AP 8
Max. Wired Client 60
WMM Supports Wi-Fi Multimedia
QoS Supports Quality of Service for bandwidth control
NTP Network Time Management
Management Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
Diagnostic tool System Log, Ping Watchdog
Mechanical & Power
IP Rate IP55
Material Outdoor UV Stabilized Enclosure
Dimension (W x D x H) 275 x 93 x 45 mm
Weight 336 ± 5g
Installation Pole mounting or Wall mounting
Power Requirements LAN
■ 24V DC, 0.5A/ Passive PoE
■ Pin 4,5 VDC+
■ Pin 7,8 VDC-
Power Consumption 7.68W
Environment & Certification
Operation Temperature -30~75 Degree C
Operating Humidity 10~95% non-condensing
Regulatory CE / RoHS
Accessory
Standard Accessories ■ 24V DC Passive PoE injector & Power cord x 1
■ Mounting Tie x 2
■ Quick Installation Guide x 1
■ CD (User’s Manual, Quick Installation Guide) x 1
 
Data Tip Model Versiune Descriere Download
13 august, 2013 Manual Utilizare WNAP-7320 v1.0