Acces Point /Repeater Wireless de exterior, 2 x conectori N mama, 300Mbps, 11 a/n, PoE, IP67, carcasa din aluminiu, 5 GHz, SNMP - WNAP-7350

Cod: WNAP-7350

Acces Point de exterior, 2 x conectori N mama, 300Mbps, PoE, IP67, carcasa din aluminiu, 5 GHz, SNMP

High Power Outdoor Wireless Coverage
PLANET Technology introduces the latest high power outdoor wireless LAN solution - the 300Mbps outdoor wireless AP, WNAP-7350. It provides higher transmit power, better performance, widely coverage and stable connection than standard outdoor wireless AP. As an IEEE 802.11a/n compliant wireless device, the WNAP-7350 is able to give stable and efficient wireless performance for long distance application; while designed with IEEE 802.11n standard and 2T2R MIMO technology makes it possible to deliver six times faster data rate up to 300Mbps than normal 802.11a wireless device. It also features adjustable output power up to 500mW to extend higher coverage in outdoor long range application.

Multiple Operating & Wireless Modes
The WNAP-7350 supports multiple wireless communication connectivity (AP / Client CPE / WDS PtP / WDS PtMP / Repeater) allowing for various application requirements and thus it gives users more comprehensive experience when using the WNAP-7350. It helps users to easily build a wireless network and extend the wireless range of existing wireless network.

The WNAP-7350 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.

Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-7350 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. To fulfill enterprise and various applications demand, the WNAP-7350 enhances security and management features such as providing multiple SSID support.

Perfect Solution for Outdoor Environment
The WNAP-7350 is perfectly suitable in outdoor environments and exposed locations. By designing with IP67 and aluminum rugged strong housing, the WNAP-7350 can perform normally under rigorous weather conditions including heavy rain, wind and snow. Moreover, the WNAP-7350 is rated to operate at the temperature from -30 to 75 Degree C; thus it can operate more stably than general outdoor equipments. It is the best way using the WNAP-7350 to build outdoor wireless access applications between buildings on campuses, business, rural areas and etc.

Flexible Deployment with PoE Feature
Compliant with IEEE 802.3af/at Power over Ethernet standard, the WNAP-7350 can be powered by PSE (Power Sourcing Equipment) via a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on the wall, ceiling or any other places where are difficult to reach. Furthermore, the WNAP-7350 is also suitable to be integrated with Solar Power PoE System to offer farther Wireless service in remote areas. It enables the wireless LAN deployment becomes more flexible and worries free from the power outlet locations.

Easy Installation & Management
With user-friendly Web UI and step by step Setup Wizard, the WNAP-7350 is easier to install, even for users who never experience setting up a wireless network. Furthermore, with SNMP-Based management interface, the WNAP-7350 is convenient to be managed and configured remotely.

 

Longer distance coverage between LAN connections
The WNAP-7350 is a cost-effective outdoor wireless solution for widely open space applications. It is ideal for outdoor wireless connections between buildings.

With built-in two N-Type Antenna connectors, the WNAP-7350 brings higher coverage and longer distance of wireless connection. The WNAP-7350 provides high output power with multiple adjust Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported in the WNAP-7350 also enables CPE users to connect to Internet via local WISP provider conveniently.

** Sincerely suggest matching the same model in outdoor wireless bridge application for getting best performance.

Hardware Specifications
Standard support IEEE 802.11a/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af/at Power over Ethernet / PD
Memory 32 Mbytes DDR SDRAM
8 Mbytes Flash
Interface Wireless IEEE 802.11a/n, 2T2R
LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX, IEEE 802.3af/at PoE/PD port
WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX
Antenna N-Type Female connectors x 2
Wireless RF Specifications
Wireless Technology IEEE 802.11a
IEEE 802.11n
Data Rate IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbp
Media Access Control CSMA / CA
Modulation Transmission / Emission Type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band 5.180GHz ~ 5.825GHz
Operating Channel
5.180GHz CH36 5.580GHz CH116
5.200GHz CH40 5.600GHz CH120
5.220GHz CH44 5.620GHz CH124
5.240GHz CH48 5.640GHz CH128
5.260GHz CH52 5.660GHz CH132
5.280GHz CH56 5.680GHz CH136
5.300GHz CH60 5.700GHz CH140
5.320GHz CH64 5.745GHz CH149
5.500GHz CH100 5.765GHz CH153
5.520GHz CH104 5.785GHz CH157
5.540GHz CH108 5.805GHz CH161
5.560GHz CH112 5.825GHz CH165

*The above 24 channels are defined in theory. The actual application will vary depends on the regulation in different regions and countries.
RF Output Power IEEE 802.11a: 27 ± 1dBm
IEEE 802.11n: 24 ± 1dBm
Receiver Sensitivity IEEE 802.11a: -91dBm
IEEE 802.11n: -92dBm
Output Power Control 3~27dBm
Software Features
LAN Built-in DHCP server supporting static IP address distributing
Supports 802.1d STP (Spanning Tree)
WAN ■ Static IP
■ Dynamic IP
■ PPPoE
■ PPTP
■ L2TP
■ IPSec
Operating Mode ■ Bridge
■ Gateway
■ WISP
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server and DMZ
Built-in firewall with Port / IP address / MAC / URL filtering
Wireless Mode ■ AP
■ Client
■ WDS PTP
■ WDS PTMP
■ WDS Repeater (AP+WDS)
Channel Width 20MHz / 40MHz
Wireless Isolation Enable it to isolate each connected wireless clients from communicating with each other mutually.
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Supports WPS (WIFI Protected Setup )
Enable / Disable SSID Broadcast
Multiple SSID Up to 2
Max. Wireless Client 40
Max. WDS AP 8
Max. Wired Client 60
WMM Supports Wi-Fi Multimedia
QoS Supports Quality of Service for bandwidth control
NTP Network Time Management
Management Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
Diagnostic tool System Log, Ping Watchdog
Mechanical & Power
IP Rate IP67
Material Aluminum
Dimension (W x D x H) 320 x 27.5 x 320 mm
Weight 2.4kg
Installation Pole mounting or Wall mounting
Power Requirements AP: IEEE 802.3af/at PoE / 48V DC input (PoE Injector included)
PoE Injector: 100~240VAC
Power Consumption 7.68W
Environment & Certification
Operation Temperature -30~75 Degree C
Operating Humidity 10~95% non-condensing
Regulatory CE / RoHS
Accessory
Standard Accessories ■ 48VDC 802.3af PoE injector & Power cord x 1
■ Mounting Kit x 1
■ Waterproof RJ-45 Connector Kit x 2
■ Quick Installation Guide x 1
■ CD (User’s Manual, Quick Installation Guide) x 1
Data Tip Model Versiune Descriere Download
13 august, 2013 Manual Utilizare WNAP-7350 v2.02
13 august, 2013 Datasheet WNAP-7350
13 august, 2013 Manual Utilizare WNAP-7350 v1.0