Acces Point / Bridge / Repeater / Router de exterior, nu include antena, conector N tata, 150Mbps, 11b/g/n, PoE, 2.4GHz - WNAP-6308

Cod: WNAP-6308

Acces Point / Bridge / Repeater / Router de exterior, nu include antena, conector N tata, 150Mbps, PoE, 2.4GHz  

High Power Outdoor Wireless Coverage
PLANET WNAP-6308 provides a wireless solution that can be easily attached directly to the antenna, which has more flexibility to extend outdoor wireless coverage. Adopting IEEE 802.11n advanced MIMO technology, it provides reliable wireless network coverage, and incredible improvement in the wireless performance. As an IEEE 802.11b/g/n compliant wireless device, the WNAP-6308 is able to give stable and efficient wireless performance for outdoor applications, while designed with IEEE 802.11n standard and 1T1R MIMO technology, the WNAP-6308 makes it possible to deliver data rate up to 150Mbps, three times faster than the normal 802.11g wireless device. With the built-in N-type antenna connector, it can directly connect with various types and high gain antenna such as grid, omni directional, flat panel and yagi-design antennas. Thus, the WNAP-6308 can easily cover a wide range and deliver much farther wireless connection with a distance of over 10km. The WNAP-6308 optionally comes with the following PLANET’s products: ANT-OM8, ANT-OM15, ANT-FP9, ANT-FP18, ANT-SE18, ANT-YG13, ANT-YG20, and ANT-GR21.

Multiple Operating & Wireless Modes
The WNAP-6308 supports multiple types of wireless communication connectivity (AP, Client CPE, WDS PtP, WDS PtMP, and Repeater) allowing for various application requirements and thus it gives users more comprehensive experience when accessing through Wireless LAN. It helps users to easily build a wireless network and extend the wireless range of the existing wireless network. Moreover, the WNAP-6308 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network.

Advanced Security and Management
In aspect of security, besides 64/128- bit WEP encryption, the WNAP-6308 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. Furthermore, with the Dual-SSID feature you can set up two different wireless networks, the WNAP-6308 can therefore serve as a virtual access point for segmented networks tailored to any office or industrial need. With the SNMP-based management interface. The WNAP-6308 is also convenient to be managed and configured remotely.

Highly Reliable Outdoor Device
The WNAP-6308 is perfectly suitable to be installed in outdoor environments and exposed locations. Rated to operate at the temperature from -35 to 65 degrees C and adopted IP55 and outdoor UV Stabilized Enclosure, the WNAP-6308 can perform stably under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-6308 can be conveniently installed in the areas where power outlets are not available. It is the best way to use the WNAP-6308 to build outdoor wireless access applications between buildings on campuses, business and rural areas, etc.

Easy Plug-n-Link
To accomplish the concept of Plug-n-Link through an easy way for outdoor wireless network deployment, the WNAP-6308 comes with a built-in N-type antenna connector, which is commonly adapted to an outdoor antenna. Therefore, it is easier to install via directly plugging into the mounted antenna. This gives the user the convenience of constructing the wireless link in a fast manner even though he has no experience in deploying a wireless network. Moreover, using the straps through the extra ring design on the casing can fasten the WNAP-6308 to prevent from shaking or dropping caused by strong wind and earthquake.

Perfect Outdoor Wireless Applications
The WNAP-6308 is a cost-effective outdoor wireless solution for widely open space applications. It is ideal for outdoor wireless connections between buildings. With the built-in N-type antenna connector, the WNAP-6308 brings longer coverage and various applications in wireless network. The WNAP-6308 can optionally be attached to higher gain antenna or a specific type of antenna for different applications. In addition, the WNAP-6308 provides high output power with multiply adjustable Tx controller, which allows CPE users to easily install and adjust the suitable value in appropriate locations.

**Sincerely suggest matching the same model in outdoor wireless bridge application for getting the best performance.

Hardware Specifications
Hardware Specifications IEEE 802.11b/g/n Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3x Flow Control
Memory 32 Mbytes DDR SDRAM
8 Mbytes Flash
Interface Wireless IEEE 802.11b/g/n, 1T1R
LAN / WAN: 1 x 10/100Base-TX, Auto-MDI / MDIX
Antenna Built-in N-type (Male) Antenna Connector
Wireless RF Specifications
Wireless Technology IEEE 802.11b/g
IEEE 802.11n
Data Rate IEEE 802.11b: 11, 5.5, 2 and 1Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
IEEE 802.11n (20MHz): up to 72Mbps
IEEE 802.11n (40MHz): up to 150Mbps
Media Access Control CSMA / CA
Modulation Transmission/Emission Type: DSSS / OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM,
DBPSK, DQPSK, CCK
Frequency Band 2.412GHz ~ 2.484GHz
Operating Channel America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power (Max.) IEEE 802.11b/g: 23 ± 1.5dBm
IEEE 802.11n: 23 ± 1.5dBm
Receiver Sensitivity IEEE 802.11b/g: -95dBm
IEEE 802.11n: -91dBm
Output Power Control 3~23dBm
Software Features
LAN Built-in DHCP Server supporting static IP address distributing
Supports 802.1d STP (Spanning Tree)
WAN    ■ Static IP
   ■ Dynamic IP
   ■ PPPoE
   ■ PPTP
   ■ L2TP
   ■ IPSec
Operating Mode    ■ Bridge
   ■ Gateway
   ■ WISP
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT Server supporting Virtual Server and DMZ
Built-in Firewall with Port / IP Address / MAC / URL Filtering
Wireless Mode    ■ AP
   ■ Client
   ■ WDS PTP
   ■ WDS PTMP
   ■ WDS Repeater (AP+WDS)
Channel Width 20MHz / 40MHz
Wireless Isolation Enables isolation of each connected wireless client from communicating with each other mutually
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Wireless LAN ACL (Access Control List) Filtering
Wireless MAC Address Filtering
Supports WPS (Wi-Fi Protected Setup )
Enable / Disable SSID Broadcast
Multiple SSID Up to 2
Max. Wireless Client 20
Max. WDS AP 8
Max. Wired Client 30
WMM (Wi-Fi Multimedia) Yes
QoS (Quality of Service) Yes
NTP(Network Time Management) Yes
Management Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS, SNMP
Diagnostic Tool System Log, Ping Watchdog
Mechanical & Power
IP Rate IP55
Material Outdoor UV Stabilized Enclosure
Dimensions (Φ x H) 45 x 169 mm
Weight 128g
Installation Pole mounting
Power Requirements LAN: 12~24V DC, Passive PoE
      Pin 4,5 V DC+
      Pin 7,8 V DC-
Power Consumption 1.5W
Environment & Certification
Operating Temperature -35 ~ 65 degrees C
Operating Humidity 5 ~ 90% non-condensing
Regulatory CE / FCC / RoHS
Accessory
Standard Accessories    ■ Passive PoE Injector & Power Cord x 1
   ■ Plastic Strap x 2
   ■ Quick Installation Guide x 1
   ■ CD (User’s Manual, Quick Installation Guide) x 1
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate